ToobSeal Inflatable Boat Interior Sealant – Quart, Case of 12
$610.95
Bixler’s ToobSeal ยฎ Interior Sealer, stops slow seam leaks and porosity in both Hypalon and PVC inflatable boats using an extraordinary acrylic based formula.
Unlike other brands that are Latex, ToobSeal is the only sealant made of acrylic which dries clear and smooth and doesn’t yellow or crack.
Our special formula encapsulates when dry so there is no chance of your inflatable boat fabric self adhering when deflated making re-inflation hopeless.
Also, if you should spill some ToobSeal on your inflatable or garage floor, it won’t cause an impossible-to-remove yellow stain.
ToobSeal adheres to the interior fabric of the tube, sealing slow leaks.
Hard to find leaks are treated and cured from the inside. That’s why the US Marine Corps trusts and uses ToobSeal.
1 quart bottle will seal a 12′ boat or raft.
Instructions for boats under 12 feet:
Deflate the boat.
Inject 1 quart (32oz) Interior Sealer equally into all the air chambers. Remove Valves if possible. If not use a funnel with a small tip.
Inflate the boat.
Shift the boat side to side and bow to stern at a 45 degree angle until the sealer has circulated and coated all inner surfaces of the boat. Sealer has the consistency of water so it is easy to apply.
Let dry for three hours. Boat is sealed! ToobSeal has an indefinite shelf life and can be stored anywhere.
For Boats over 12 feet:
Follow above instructions using roughly 3 oz of Interior Sealer per foot as a quantity guideline.
If the boat is too large or heavy to “tumble”, then take the boat out and do some wave pounding.
“I’ve used and sold it for years. It works great!”ย – Mitch Bernardo, Sunset Inflatables, Santa Ana, California
“My techs prefer ToobSeal to other brands. It works better and doesn’t leave yellow stains on the boats they’re repairing.”ย – Dick Cromwell, InflatableXperts of RI and MD
