Description
Inflatable Boat Stainless Steel Tow Ring with Hypalon apron in white, light gray, dark gray, black and red.
- The strongest and only tow-ring on the internet available in genuine Pennel and Orca, 1100 denier hypalon fabric.
- Available in white, light gray, dark gray, red and black.
- Dimensions:
- Large (130)- 8″ x 5.5″ oval, 2.5″ Ring
- The tow-rings have a Hypalon apron, a weather proof polypropylene strap, and a stainless steel D-ring.
- The bottom pad is made of raft floor material and is pre-sanded for a superior bond.
- Double Hypalon pieces are glued together then cross stitched for superior hold and strength. The straps are computer sewn and glued to the bottom pad; the Hypalon apron is glued over the tow-ring and bottom pad assembly.
- Proudly made in the US with the highest quality non rusting Stainless.
- Our tow-rings serve many purposes including bimini, lifting rings and general purpose attachment points.
D Ring installation instructions:
- Decide where you’re going to place the d ring then trace around tow ring with a pencil.
- Apply masking tape or painting tape around the traced area.
- Sand the boat as well as the d ring lightly and clean the area well using Toluene
- Apply 3 applications of glue (2 on boat, one on d ring) allowing each application to become tacky (roughly 15 minutes). Glues listed in related products below.
- Stick the tow ring down to boat and roll out the bubbles with a roller rasp.
- Allow to dry for 24 hours.
