Description
Novurania Valve Repair Kit for Old Style Novurania Valves.
- The older style valve is designed to replace the inner workings of the valve, not the whole valve itself.
- When you open the cap and there is a metal pin with a + on the top, you have the old style valve.
- Novurania Valve repair kit is for old style valve caps and valve adapter, see related products below.
Installation Instructions:
- On the old valve, remove the outside collar that screws off.
- Take out u shaped brass clip with very fine needle nose pliers (place the needle nose pliers in the two holes and pinch). This will loosen the old valve.
- Remove old valve.
- Place new valve in, put new brass clip in with very small needle nose pliers.
- Screw new collar on.
